• ULBA METALLURGICAL PLANT JSC

    One of the worldwide recognized producers of Uranium, Beryllium, Tantalum and Niobium products. The company is incorporated into the National Atomic Company “Kazatomprom”
    To the future with us!
  • ULBA METALLURGICAL PLANT JSC

    Uranium division of “Ulba Metallurgical Plant” JSC is unique and one of the world largest producers of nuclear fuel for nuclear power plants. It has great work experience in nuclear sector
    To the future with us!
  • ULBA METALLURGICAL PLANT JSC"

    Beryllium production of the "Ulba Metallurgical Plant" JSC is one of the three enterprises in the world with full production cycle from ore concentrate processing to finished products output with the rated quality set-ups.
    To the future with us!
  • ULBA METALLURGICAL PLANT JSC

    Tantalum production of "Ulba Metallurgical Plant" JSC is a single enterprise on the territory of CIS and one of the world largest enterprises with the full production cycle from processing of tantalum and niobium containing raw materials to finished products.
    To the future with us!

Beryllium billets/articles

Beryllium billets/articles
Beryllium content: 97.8 wt. %, min

Impurities, wt. %, max

Fe

Al

Si

Cr

F

O

C

Ti

total Mg, Mn, Ni, Cu

0.25

0.03

0.04

0.05

0.002

1.3

0.12

0.04

0.08

FP-56- compact billets produced by hot forging of P-56 powder on a press in steel casings.
Max. dimensions - 1300 mm (Dia) and 300 mm (height).
FCIP-56– compact billets produced by hot forging of CIP billets.
Max. dimensions - 550 mm (Dia) and 300 mm (height).
НР-56- compact billets produced by vacuum hot forging of CIP billets. CIP - cold isostatic pressing of powder.
Max. dimensions - 450 mm (Dia) and 480 mm (height).
НIP-56 - compact billets produced by hot isostatic pressing of CIP billets.
Max. dimensions - 250 mm (Dia.) and 500 mm (height).
ЕНР-56 - compact billets produced by hot extrusion of HP-56 billets.
Dimensions - 10-180 mm Dia., length up to 2200 mm (depending on diameter).
ВНР-56 - compact billets produced by hot forging of HP-56 billets.
Max. dimensions - 550 mm (Dia.) and 300 mm (height).
Beryllium of nuclear grade (advanced requirements to chemical composition)

Beryllium billets/articles

Mechanical characteristics

Grades

Sample direction of axis towards direction force exertion

Tensile ultimate strength, kgf/mm2, min

Elongation, %, min

ЕНР

crosswise

actual

actual

longwise

50

2

НР

crosswise

35

1,3

longwise

30

0,8

НIP

crosswise

40

1,3

longwise

FP

crosswise

30

0,8

longwise

факт.

факт.

ВНР,
FCIP
as agreed upon with customer

Density of billets of all grades is not less than 1.84 g/cc.
Billets can be controlled by X-Ray method.
Finished parts and products can be manufactured from all grades of structural beryllium.

«In USA the hugest purchaser of JSC UMP beryllium facility products is IBC Advanced Alloys Corporation (IBC), Canada»

kn    Material safety data sheet 

Marketing department:
E-mail: Marketing-be@ulba.kz
tel/fax (7232)298-247

kn   Beryllium products in the European market are sold by Tropag Oscar H. Ritter nachf. GmbH.

kn  Beryllium products in the Chinese market and the South-East Asia are also sold by ULBA-CHINA Co. Ltd.
e-mail info@ulba.cn
www.ulba.cn

 

KN Request for quotation

 

05-01-2017