|
|
|
Niobium products
Rod
Upon agreement of the parties could be supplied as annealed (heat treatment) or non-annealed (no heat treatment).
Chemical composition of rod is similar to that of ingot (except for C, O, N and H)
<
Rod as drawn and with the surface as non-turned
| Diameter, mm |
Length, mm |
| 3.0 - 6.0 |
500 - 4 000 |
| 6.0 - 8.0 |
100 - 2 000 |
Rods with the turning of surface
| Diameter, mm |
Length, mm |
| 3.0 - 15.0 |
300 - 2 000 |
| 16 - 29 |
300 - 1 500 |
| 30 - 50 |
300 - 1200 |
| 51 - 90 |
300 - 1000 |
Roughness of turned rods < RZ 40.
Upon request of the customer products with other dimensions are available.
Wire
Upon agreement of the parties could be supplied as annealed (heat treatment) or non-annealed (no heat treatment)
Chemical composition of rod is similar to that of ingot (except for C, O, N and H)
| Diameter, mm |
Length, mm |
0.15 - 0.45
0.45 - 1.0
1.0 - 1.3
1.3 - 1.5
1.5 - 3.0 |
>25 000
>15 000
>15 000
>15 000
>15 000 |
Upon request of the customer products with other dimensions are available.
 Marketing service, Tantalum Department
e-mail: Marketing_Ta@ulba.kz
Phone.: (7232) 29-83-16
Fax: (7232) 29-83-16, 24-06-83, 47-36-42
|
|
Copyright 2001-2012
|
|
